High-speed hair grafting machine correct process flow

1, the use of hair (pile) pulp fair in the wool planting process plays a key role, first in the application of hair (pile) slurry first participate in the necessary quantitative additives (1.5%-2%) or additives add 1 to 1 water mixed stirring, and then add the slurry stirring average, the modulated pulp must be used immediately, can not be placed for too long (within 8 hours), otherwise the malformed temperature will also produce cross-linking and affect the use, which is to cause attention in the operation. If the wool slurry is too thick in printing, you can add an appropriate amount of water to dilute it, which helps the benign operation.
2. It is proposed to use 800 mesh (80 mesh) plates, screen printing: pay attention to the time of the last printing of the wool (pile) slurry and the operation of the wool planting, must not be separated by 1 minute, and the number of printing is adjusted according to the relevant fabric, time and other factors.
3. The cloth is naturally dry, and it can be washed at 60°C after 24 hours. If the customer requires strict quality, it is necessary to bake, 160 °C, 10-60 seconds, of course, the baking temperature, the time also needs to be adjusted according to the coherent fabric, request, etc.
4. The last process of cloth wool planting liquidates the tail process, uses the hair suction machine to suck the hair, and then uses adhesive paper to glue the residual part of the cloth to ship the finished wool.