Introduction to several working methods of the hair planting machine

1. Fully automatic processing:

This way of working is to connect the wool planting machine to the processing product center, without stopping in the middle, unless manually stopped, but this requires more than two fixtures to be fully automatic cycle processing. This processing method can release manpower to a greater extent. The working mode is: in the standby state, press the number "1" to enter the automatic working mode; When "stop", stop working, at this time you can do maintenance and repair of the machinery; When operating, pay attention to not having other items on the stand, and pay attention to production safety.

2. Semi-automatic processing:

Working mode: press the "start" button once, the wool planting machine will be processed once, and the machine head will be stopped at the highest position after processing the product, and the work will reach the starting point. Manually replace the product, press the "start" button again, and process it again. Machining will not take place without pressing the "Start" button, so maintenance and repair can be carried out at any time in non-working mode.